Go toLog in Go toSign up
Blizzard Kit with old Tippmann 98 Style Spring and Sear Guide

Blizzard Kit with old Tippmann 98 Style Spring and Sear Guide



 
 
 
 
If you have an older version Tippmann 98 with the old style sear and spring, you will need the new sear and spring to make it work. Courtesy of "Jaf" who made the mod and shared with MCS of his mod. You can also make the mod below to the body and use the old sear and spring you have.


Drill a hole and install pin


Remove material for spring


Old sear and spring installed.

If you don't want to make the mod, you can get the new spring and sear below.